How to Increase Your Concrete Finisher Salary: Certifications, Skills and Career Moves

By Frank AbalosUpdated
A concrete finisher wearing a hard hat, safety glasses, gloves and a high-visibility vest smooths a fresh concrete slab with a hand trowel

See if you qualify for training programs

Answer a few questions in 2 minutes. Free, no commitment.

Start

Cement masons and concrete finishers earned a median of $57,020 a year, or $27.41 an hour, in May 2025, according to the Bureau of Labor Statistics. The middle half of the trade earned between $47,010 and $66,870, and the top 10 percent earned more than $85,480. Job postings run lower, with ZipRecruiter listing concrete finisher pay from about $27,500 to $71,000 a year in August 2026, while foremen and other construction trade supervisors earned a median of $79,920.

The distance between the bottom and the top of that range is not explained by time on the job alone. Certifications such as the American Concrete Institute (ACI) flatwork credentials, specialized finishing skills, the type of work you pour, the state you work in, and a move into supervision or estimating each change the number, though the evidence behind each lever is stronger for some than others.

Key Takeaways

  • The median concrete finisher salary in the US was $57,020 a year, or $27.41 an hour, in May 2025, based on BLS data for cement masons and concrete finishers.
  • Job postings average $24.19 an hour on ZipRecruiter and $26.08 an hour on Indeed, with posted rates ranging from about $18 to $38 an hour.
  • On ZipRecruiter, cement finisher postings average $61,475, about 22% above concrete finisher postings at $50,307.
  • ACI offers three flatwork levels. The Finisher level requires 1,500 hours of finishing experience plus a performance exam, and the Advanced Finisher level requires a written exam plus either 4,500 hours or 1,500 hours and a performance exam.
  • Hawaii, Alaska, Illinois, Washington, and Oregon had the highest state median wages for concrete finishers in May 2025, all above $68,000.
  • Local government, nonresidential building, and residential building work paid higher medians than foundation contractors, which employ about half of the trade.
  • The median rose 27.2% from May 2019 to May 2025, but consumer prices rose about 25.5% over the same period, so pay after inflation was roughly flat.

What Concrete Finishers Earn Today

How much do concrete finishers make? The answer depends on whether you look at what employers report paying or what job postings advertise. The BLS occupational wage profile for cement masons and concrete finishers draws on the Occupational Employment and Wage Statistics (OEWS) survey, covers 206,170 jobs, and is the most complete source, while job boards show current advertised rates.

Source

Figure

Method

BLS, May 2025

$57,020 median; 10th to 90th percentile $39,190 to $85,480; 206,170 jobs

Employer wage survey, cement masons and concrete finishers

ZipRecruiter, August 2026

$50,307 average ($24.19 an hour); 25th to 75th percentile $41,500 to $57,000

Job postings plus third-party data

Indeed, August 2026

$26.08 an hour average; $18.06 to $37.65

6,300 salaries from job postings over the past 36 months

Why These Numbers Differ

Each source measures something different. BLS asks employers what they actually pay workers on the payroll, and it reports both a median ($57,020) and a mean ($60,050). The median is the midpoint, with half of finishers above it and half below, so a small group of high earners cannot pull it upward the way they pull the mean.

Job boards measure advertised base rates for open positions, which may leave out overtime and fringe benefits. BLS also groups cement masons and concrete finishers into one occupation, code 47-2051, so a cement mason salary and a concrete finisher salary are the same figure in BLS data.

Hourly Pay vs Annual Pay

Concrete finisher hourly wage figures convert to annual pay at 2,080 hours, which assumes 40 hours a week for 52 weeks. At the BLS hourly median of $27.41, that works out to about $57,010 a year. Indeed's $26.08 average works out to about $54,250.

Real annual earnings swing around that conversion. BLS notes that masons work mostly outdoors, so bad weather can cut scheduled hours, and that some work overtime to meet construction deadlines. Track your actual hours across a full year before comparing your pay to an annual figure.

The Concrete Finisher Pay Ladder

The concrete finisher career path runs from helper to finisher to lead, and from there into supervision, estimating, or ownership. BLS does not publish pay by career stage, so each stage is paired with the closest published figure.

Stage

Typical role

Pay signal

Source

Entry

Helper, laborer, apprentice

10th percentile $39,190; postings from about $18 an hour

BLS May 2025, Indeed

Core

Concrete finisher

Median $57,020 ($27.41 an hour)

BLS May 2025

Skilled

Cement finisher, lead finisher

75th percentile $66,870; cement finisher postings average $61,475

BLS May 2025, ZipRecruiter

Leadership

Foreman, superintendent, supervisor

Median $79,920 for first-line supervisors of construction trades

BLS May 2025

Specialist and business

Estimator, concrete contractor

Median $78,740 for cost estimators; contractor income varies

BLS May 2025

How Much Does Experience Add?

BLS publishes no wage data by years of experience, so percentiles are the closest proxy. Nationally, the 75th percentile of $66,870 sits about 42% above the 25th percentile of $47,010, and the top 10 percent earn more than twice what the bottom 10 percent earn.

State data shows the same pattern at a higher level. In New York, the 75th percentile ($84,440) runs about 49% above the 25th percentile ($56,540), and the top 10 percent earn more than $102,970, according to BLS May 2025 data. Those gaps reflect location, employer, and type of work as well as experience.

Entry Level Pay and Your First Raise

The lowest-paid 10 percent of cement masons and concrete finishers earned less than $39,190 a year in May 2025, or about $18.84 an hour. Helpers and laborers still learning to finish can start in this range.

Logging your finishing hours from day one pays off later, because ACI counts verified hours toward its Finisher and Advanced Finisher levels. Apprentices in registered programs move up a wage schedule as their skills increase, since federal apprenticeship rules require a progressively increasing wage scale.

Foreman and Supervisor Pay

First-line supervisors of construction trades and extraction workers earned a median of $79,920 a year, or $38.42 an hour, in May 2025, with the top 10 percent above $128,260. That BLS classification covers foremen across every trade, not only concrete, so treat it as a benchmark rather than a concrete foreman salary. It still shows a $22,900 gap over the median for finishers.

Certifications That Can Raise Your Concrete Finisher Salary

No federal source publishes wage data by certification, so no one can say exactly how much a credential adds. Concrete finisher certifications work as proof of skill: they can qualify you for jobs whose specifications call for certified finishers, and they give you something concrete to point to when you ask for more.

ACI Concrete Flatwork Certifications

The ACI concrete flatwork finisher certification program has three levels, plus a decorative credential for finishers who already hold one of them. ACI updated the names and requirements of the program, and its Concrete Flatwork Associate, Finisher, and Advanced Finisher program page lists sessions and policies.

ACI level

Requirements

Valid for

Concrete Flatwork Associate

Pass the written exam; no experience requirement

5 years

Concrete Flatwork Finisher

1,500 hours of direct finishing experience plus a performance exam

5 years

Advanced Concrete Flatwork Finisher

Written exam plus either 4,500 hours of finishing experience, or 1,500 hours and a performance exam

5 years

Decorative Concrete Flatwork Finisher

Advanced Finisher certification, the decorative written exam, and 1,500 hours of decorative finishing experience

5 years

ACI renamed the levels under its current policy, so older resumes and job postings may still use earlier titles such as Flatwork Technician and Flatwork Tradesman. ACI runs exams through local sponsoring groups, which set their own session fees, so the cost depends on where you test. Recertification every five years requires either retaking the exam or completing 10 hours of approved continuing education during the five-year certification period, plus documented finishing experience of 1,500 hours for the Finisher level or 4,500 hours for Advanced Finisher.

Apprenticeships and Union Membership

BLS reports that masons typically learn the trade through an apprenticeship or on the job, and that unions and contractor associations sponsor apprenticeship programs. After completing a program, apprentices are considered journey workers who can work on their own. The BLS Occupational Outlook Handbook profile of masonry workers covers the path in more detail.

The union for cement masons is the Operative Plasterers' and Cement Masons' International Association (OPCMIA). Union concrete finisher pay is set by local agreements, and no federal source publishes union scale for this occupation, so the honest comparison is local. Ask the local for its current wage sheet and compare the whole package, including health coverage and pension contributions, against nonunion offers in the same area.

Safety, Equipment, and Other Credentials

OSHA 10-hour and 30-hour construction cards come from the OSHA Outreach Training Program. OSHA describes the program as voluntary and not a certification, though some states, cities, and employers require the cards as a condition of employment.

Equipment qualifications can widen the jobs you qualify for. Forklift and telehandler operation, ride-on trowel and laser screed experience, and a commercial driver's license (CDL) for driving a mixer or hauling equipment each add work a finisher can take on. Dreambound, which compares vocational training programs across the United States, lists CDL-A classes near you for finishers who want to add a license. For an inspection or testing path, ACI also offers the Concrete Field Testing Technician, Grade I certification.

Skills That Command Higher Pay

BLS reports one wage for the whole occupation and publishes no pay data by skill, so specific skills raise pay through the jobs and employers they open up rather than through a separate published rate. Each skill here moves a finisher from general flatwork toward work that fewer people can do.

Decorative, Stamped, and Polished Concrete

Decorative concrete covers coloring, stamping, exposed aggregate, and polished floors. ACI's decorative certification exam covers coloring, stamping, exposed finishes, stairs, and cleaning and sealing, and its experience requirement includes at least 250 hours each in coloring, stamping, exposed finishes, and stairs. Polishing adds grinding equipment and a separate set of floor-preparation skills. A mistake on a decorative pour is visible and expensive to fix, which is why the work rewards finishers with a track record.

Power Trowel, Ride On, and Laser Screed Operation

Walk-behind and ride-on power trowels finish large slabs faster than hand tools, and laser screeds set grade across a placement with machine control. A finisher who can run this equipment on a warehouse or commercial floor is qualified for larger placements than a hand-tool-only finisher. Asking for time on the equipment early builds that record.

Slab Flatness, Levelness, and Jointing

Commercial and industrial floors can be specified by F-numbers, which measure floor flatness (FF) and levelness (FL) under ASTM E1155. Hitting a tight F-number specification takes control of timing, straightedging, and trowel passes. Jointing matters just as much: saw-cut timing and joint layout decide whether a slab cracks where it should.

Reading Plans, Layout, and Estimating

Reading drawings lets you check elevations and joint layouts before the pour. Layout skills, such as setting forms and grades, move you toward lead and foreman work. Basic estimating, such as calculating cubic yards and crew hours, is the first step toward estimating and project management roles.

Crew Leadership and Scheduling

Placement runs on a clock once the truck arrives. A finisher who can organize a crew, sequence the work, and call the timing for each pass is already doing part of a foreman's job. BLS lists supervisor and superintendent roles as advancement paths for experienced masons, and leading on the slab is how a finisher shows readiness for them.

Cold Weather and Hot Weather Concreting

Temperature changes how concrete sets, and ACI publishes separate guides for hot weather (ACI 305) and cold weather (ACI 306) concreting. Finishers who know how to protect a pour from freezing, use blankets and heat, or manage fast setting in high heat can keep working in conditions that stop other crews. In regions with long winters, that skill can mean more paid hours across the year.

Career Moves That Raise Your Salary

Skills and credentials raise your value. Career moves change where that value gets paid.

Move to Higher Paying Work Types

The highest paying concrete finisher jobs by industry are not where the bulk of the trade works. Foundation, structure, and building exterior contractors employ about half of all cement masons and concrete finishers, and their median sits just below the national figure.

Industry (BLS May 2025)

Median annual wage

Jobs

Local government

$73,470

1,560

Nonresidential building construction

$61,180

19,610

Other specialty trade contractors

$58,770

33,380

Residential building construction

$58,160

8,570

Foundation, structure, and building exterior contractors

$56,410

104,250

Highway, street, and bridge construction

$55,480

17,730

The largest employer group covers a wide mix of firms, from small residential foundation crews to large structural contractors, and nonresidential building work paid $4,770 more at the median. Heavy civil work such as highways and bridges paid less in May 2025, though public projects can carry prevailing wage rates.

Relocate to a Higher Paying State or Metro

Concrete finisher salary by state varies more than any other factor in the BLS data. In May 2025, Hawaii's median was more than double Mississippi's.

State

Median annual wage (BLS May 2025)

Hawaii

$95,890

Alaska

$92,960

Illinois

$78,170

Washington

$77,520

Oregon

$68,530

California

$62,700

Florida

$48,680

Texas

$47,500

South Dakota

$47,160

Mississippi

$43,980

At the metro level, Kahului-Wailuku, Hawaii, had the highest median at $104,450. Some mainland metros also pay well above the national median, including Appleton, Wisconsin ($68,990), Cleveland, Ohio ($66,080), Salt Lake City-Murray, Utah ($60,740), and Boulder, Colorado ($60,330). Indeed's highest-paying cities by posted rate include Pewaukee, Wisconsin ($34.65 an hour), Fairfield, Ohio ($30.20), Phoenix ($29.26), and Denver ($28.95).

A higher wage only helps if it outruns the cost of living, so compare rent, taxes, and the length of the working season before moving. Illinois and Washington pair high medians with large concrete workforces of 5,890 and 4,440 jobs.

Switch Job Titles and Search Terms

Job boards price titles differently even when the work overlaps. ZipRecruiter's August 2026 averages list cement finisher at $61,475, about 22% above concrete finisher at $50,307, while drywall finisher averages $50,024, finisher $43,249, and floor finisher $36,683. Those are posting averages, and the gap partly reflects which employers use which title, since BLS counts both cement masons and concrete finishers in a single occupation.

The practical step is to search every title that matches your work, including cement mason, cement finisher, concrete finisher, and flatwork finisher. On your resume, name the specific work you do, such as decorative finishes or F-number floors.

Become a Foreman or Superintendent

BLS lists advancement to supervisor, superintendent, or other construction management positions as a path for experienced masons. A foreman runs the crew on site, while a superintendent oversees a project or several crews and reports to the contractor. Supervisors across the construction trades earned a median of $79,920 in May 2025. BLS publishes no separate figure for superintendents, whose pay depends on project size and employer.

Move Into Estimating or Project Management

Estimators price jobs before they are won, using quantities, labor hours, and material costs. Cost estimators earned a median of $78,740 in May 2025, and a finisher who knows how long a placement actually takes brings field knowledge straight into the estimate. Dreambound also lists construction management programs for finishers who want formal training for that step. Project management builds on the same skills, and the guide on how long it takes to become a construction manager covers the education and experience that route usually involves.

Start Your Own Concrete Business

BLS notes that experienced masonry workers may become independent contractors. Owning the business means your income comes from margins rather than an hourly rate, and it carries costs an employee never sees: liability and workers' compensation insurance, equipment and trucks, state or local contractor licensing where required, and cash flow gaps between paying your crew and getting paid by the client. Owners can earn more than employed finishers or less in a slow year, so running jobs for another contractor first is the lower-risk test.

Government and Public Works Jobs

Local government paid cement masons and concrete finishers a median of $73,470 in May 2025, the highest median in the industry table above, though it employed only 1,560 of them.

Public construction can pay more even when the employer is private. Under the Davis-Bacon Act, contractors on federally funded or assisted construction contracts over $2,000 must pay laborers and mechanics no less than the locally prevailing wages and fringe benefits. Some states have their own prevailing wage laws for state-funded projects, so ask whether a job is a prevailing wage project before comparing offers.

A Step by Step Roadmap to a Higher Salary

This timeline is an illustration of how the levers stack, not a BLS statistic, and your pace depends on your market and the hours you log.

Timeline

Action

Goal

Year 0 to 1

Join an apprenticeship or learn on the job; earn an OSHA 10-hour card; log finishing hours

Reach 1,500 verified hours

Year 1 to 2

Take the ACI Flatwork Associate exam, then the Finisher performance exam

ACI credential on your resume

Year 2 to 4

Specialize in decorative work, polishing, or large slab placements; log hours toward 4,500

Advanced Finisher eligibility

Year 4 to 7

Lead crews; learn layout and estimating

Foreman responsibilities

Year 7 and beyond

Move toward superintendent, estimator, or business owner

Superintendent, estimator, or owner role

How to Negotiate a Raise or a Better Offer

What Data to Bring

Bring the BLS median for your state and, where available, your metro, since a national figure means little in Hawaii or Mississippi. Add current posted rates for your title in your area, a list of your certifications, and your verified finishing hours. Specific results, such as F-numbers hit or crews you have led, carry more weight than general claims.

When to Ask

Timing matters as much as the number. A request lands better when you can point to something that changed since your last raise.

After a Certification, a Major Project, or Taking on a Lead Role

Ask soon after you pass an ACI exam, finish a demanding placement without callbacks, or start running a crew. At that point you are asking to be paid for work you are already doing, which is an easier conversation than asking to be paid for work you hope to do.

What to Ask For Beyond Hourly Pay

Base rate is only part of the offer. Ask about overtime rules, per diem for travel jobs, tool and boot allowances, payment for training and ACI exam fees, health coverage, and retirement contributions, including pension contributions on union jobs.

Job Outlook and Pay Trends for 2027 and Beyond

Indicator

Value

Cement masons and concrete finishers employed (May 2025)

206,170

Median pay, May 2019 to May 2025

$44,810 to $57,020 (+27.2%; consumer prices +25.5%)

Projected growth, 2025 to 2035

2% (slower than average), about 13,600 openings a year

Typical entry education

No formal educational credential in BLS projections; the BLS masonry profile lists a high school diploma

After inflation, the typical finisher’s pay was roughly flat between 2019 and 2025, based on the BLS Consumer Price Index.

What Is Driving Demand

BLS expects most openings for masonry workers to come from the need to replace workers who move to other occupations or leave the labor force, such as to retire, rather than from growth. For finishers, that means openings appear even in a slow-growth trade, including lead and foreman roles that open when experienced workers retire.

Automation, Laser Screeds, and Technology

Laser screeds, ride-on trowels, and machine-controlled grading have changed how large slabs get placed, but they still need skilled operators and finishers for edges, joints, and detail work. The practical effect is that finishers who can run the equipment are qualified for more of the work.

Frequently Asked Questions

How much does a concrete finisher make a year?

The median concrete finisher salary was $57,020 a year in May 2025, according to BLS data for cement masons and concrete finishers. The middle half earned between $47,010 and $66,870, and the top 10 percent earned more than $85,480.

How much does a concrete finisher make per hour?

The BLS hourly median was $27.41 in May 2025. Job postings average $26.08 an hour on Indeed and $24.19 on ZipRecruiter, with posted rates ranging from about $18 to $38 an hour.

How can I increase my concrete finisher salary?

The main levers are certification, specialized skills such as decorative work or F-number floors, moving to higher-paying work types or states, and stepping into lead, foreman, or estimating roles. Each one changes which jobs you qualify for.

Is ACI certification worth it for concrete finishers?

ACI certification is a recognized way to prove finishing skill, and ACI promotes the credential to the people who write project specifications. No federal source publishes a pay premium for it, so its value shows up in the jobs it qualifies you for and in raise negotiations.

What are the ACI concrete flatwork certification levels?

ACI offers Concrete Flatwork Associate, Concrete Flatwork Finisher, and Advanced Concrete Flatwork Finisher, plus a separate Decorative Concrete Flatwork Finisher certification that requires Advanced Finisher status first.

How many hours do you need for ACI Finisher certification?

The Finisher level requires 1,500 hours of direct finishing experience and a performance exam. The Advanced Finisher level requires a written exam plus either 4,500 hours or 1,500 hours and a performance exam.

How much does ACI certification cost?

ACI exams are run by local sponsoring groups, which set their own session fees, so cost varies by location. Check the ACI sessions calendar for sessions and fees near you.

Do union concrete finishers make more?

Union pay is set by local agreements between the OPCMIA and contractors, and no federal source publishes union scale for this occupation. Compare the full package, including health and pension contributions, against nonunion offers in the same area.

What is the difference between a concrete finisher and a cement mason?

The two titles overlap, and BLS counts both in one occupation, cement masons and concrete finishers. Cement mason is the more traditional title, while concrete finisher focuses on placing and finishing flatwork.

Which state pays concrete finishers the most?

Hawaii had the highest state median in May 2025 at $95,890, followed by Alaska at $92,960 and Illinois at $78,170, according to BLS.

Which type of concrete work pays the most?

Among the industries that employ large numbers of finishers, local government paid the highest median at $73,470 in May 2025, followed by nonresidential building construction at $61,180. Foundation contractors, the largest employer, paid $56,410.

How much does a concrete foreman make?

BLS does not publish a concrete-specific foreman figure. First-line supervisors across the construction trades earned a median of $79,920 in May 2025, with the top 10 percent above $128,260.

Can concrete finishers make six figures?

Six figures is above the top 10 percent nationally, where the threshold is $85,480. Hawaii and Alaska have state medians above $90,000, and the top quarter of construction trade supervisors earn more than $101,460, but the typical finisher earns well below $100,000.

Is concrete finishing a good career?

It depends on what you want from it. BLS projects 2% growth from 2025 to 2035 with about 13,600 openings a year, and you can start without a degree, but the work is physical and outdoors, and pay growth comes mainly from skills and role changes.

How long does it take to become an advanced concrete finisher?

ACI's Advanced Finisher level requires either 4,500 hours of finishing experience, roughly three years of full-time work, or 1,500 hours plus a passed performance exam, roughly one year. Both routes also require the written exam.

Building a Higher Concrete Finisher Salary Over Time

The $57,020 median is a reference point, not a ceiling. Skill level and job title, ACI certification, the type of work you pour, where you work, and a move into leadership or estimating each shift concrete finisher pay, and the gains add up when several are combined. Because pay has only kept pace with prices since 2019, those moves matter more than waiting for the market. Dreambound lists training programs by trade and location across the United States. Wage figures here come from the BLS Occupational Employment and Wage Statistics survey for May 2025 unless a job board is named, and job board figures reflect advertised pay as of August 2026.

Related Career Guides

Frank Abalos
Written by
Frank Abalos

Frank is a Senior Automation Engineer at Dreambound, where he designs and builds the automation systems and workflows that support the team's operations. His Mechatronics Engineering degree blends mechanical, electronics, and software engineering into a hands-on, systems-minded approach to his work. That engineering depth shapes how he understands the tools, machines, and technical skills behind today's technology and skilled-trade careers, from automation and robotics to the mechanical and electronics trades that keep modern industries running.

Share this post: