Online Sterile Processing Technician Classes

See if you qualify for Sterile Processing Technician programs
Answer a few questions in 2 minutes. Free, no commitment.
The classroom side of sterile processing training moves online cleanly. Infection control, decontamination, sterilization methods, instrument identification, and exam prep all translate to a screen, and most people finish that coursework in two to four months.
What does not move online is the part that trips people up: the hands-on hours. The most recognized credential, CRCST, requires 400 hours of supervised experience in an actual sterile processing department, and no online class can hand you those. Those hours happen through a placement or externship in a real department, which some programs help you arrange and others leave to you. Medical equipment preparers, the federal category this work falls under, earn a median of $47,700 a year, so it pays to get the path right before you commit to a program.
This page compares the online sterile processing technician classes worth considering, including what they cost, which certification each one prepares you for, and where those required hours come from.
Key Points
- Online sterile processing technician classes cover the classroom portion of training, including infection control, decontamination, sterilization, and certification exam prep.
- The CRCST credential through HSPA requires 400 hours of hands-on experience in a sterile processing department, which online coursework alone cannot provide.
- Program costs range from a few hundred dollars for self-paced diplomas to about $4,000 for instructor-led bootcamps that bundle an exam voucher.
- Medical equipment preparers, the federal category that includes many sterile processing roles, earn a median of $47,700 a year, though pay varies by state, employer, and shift.
- CRCST through HSPA and CSPDT through CBSPD are the two common certification routes, and the right one depends on your state and your employer.
Can You Train for Sterile Processing Fully Online?
The coursework, yes. The hands-on hours, usually not. That split is the whole story, and it is the part worth understanding before you pay for anything.
The knowledge half of the job, how an instrument moves from a contaminated tray back to a sterile, ready-to-use state, teaches well on a screen. The physical half runs on real autoclaves, real instrument sets, and real department quality checks, and a laptop cannot stand in for those. So a "100% online" program means the classes are online, while any required experience hours still happen inside a facility.
If you are still weighing whether the role fits you, it helps to start with what a sterile processing technician actually does before you pay for training. Once you are past that, three questions settle most of the decision:
- Which certification exam does the program prepare you for?
- Does that credential require hands-on hours, and how many?
- Does the program help you arrange those hours, or is that on you?
What Online Coursework Covers
Most reputable programs teach the same core, because it maps directly to what the certification exams test. Expect coursework in:
- Medical terminology and basic anatomy
- Infection prevention and standard precautions
- Decontamination procedures and workflow
- Cleaning, inspection, and assembly of instrument sets
- Sterilization and high-level disinfection methods
- Surgical instrument identification
- Sterile storage and distribution
- Quality assurance, documentation, and traceability
- Certification exam preparation
Depth is what separates a strong program from an average one, because the topic list is nearly identical everywhere. Sterile processing is detail work with real stakes: the sterilization and disinfection steps follow published CDC infection-control standards, and a packaging error or a missed step can put a patient at risk downstream in the operating room. The programs worth paying for explain why each step exists, so you grasp the stakes instead of memorizing a sequence.
Where the Required Hands-On Hours Actually Happen
This is the detail that decides whether an online program actually gets you certified, so it is worth slowing down on.
The most widely recognized credential is the CRCST from the Healthcare Sterile Processing Association (HSPA). To earn it, you pass the exam and complete 400 hours of hands-on experience in a sterile processing department. HSPA splits those hours across the main areas of the job: decontamination (120 hours), preparation and packaging (120 hours), and sterilization (120 hours), with the remainder in storage, distribution, and quality assurance. You can log them either before you test or within six months of passing, which is the provisional route online students usually take, and HSPA states plainly that it does not place you into those hours; arranging them is your responsibility.
That is why "how do students complete the 400 hours" is the question that matters most when you compare programs. Some coordinate a clinical placement or externship. Others prepare you for the exam and leave the hours entirely to you, which can mean cold-calling local hospitals or surgery centers. Neither approach is wrong, but the difference changes how long certification really takes and how much legwork you are signing up for. A second credential, CSPDT, skips the 400-hour structure entirely, which is worth knowing if placements are hard to find where you live.
Comparing Online Sterile Processing Programs
Dreambound lists these online programs so you can line them up side by side on cost, format, and which exam they prepare you for. Comparing is free, and no program here can promise you a job or a certification, so weigh them on what you can verify. The programs below are the online sterile processing options currently listed on Dreambound.
Penn Foster - Sterile Processing Career Diploma
Best for self-paced learners on a budget. If you are studying around a job, Penn Foster's career-diploma format lets you move at your own pace, and it sits at the lower-cost end of the online routes while preparing you for the CRCST exam. Plan on a few months of coursework, with the 400-hour requirement still ahead of you afterward.
Preppy - Sterile Processing Tech
Best for budget-conscious learners comparing exam-prep options. Preppy leans on partnerships with accredited providers to deliver certification-focused training at a discounted rate, around $1,599, over roughly 16 weeks, and prepares students for the HSPA CRCST exam. It carries the lowest sticker price in this group, so weigh what is included against the pricier, higher-support options.
Herzing University - Diploma in Sterile Processing
Best for learners who want a university-affiliated diploma. Herzing's online diploma comes through an accredited university, which some students and employers value for the institutional backing, and it runs longer than the bootcamps at roughly 10 months. Check current tuition on the program page, since pricing is not listed here.
Program | Format and length | Cost |
|---|---|---|
Preppy | Self-paced, about 16 weeks | About $1,599 |
Penn Foster | Self-paced diploma | Lower-cost |
Health Tech Academy | Bootcamp, about 16 weeks | About $2,900 |
Herzing University | University diploma, about 10 months | Confirm on page |
Placement help is the detail worth confirming directly, so before you choose, ask each program whether it coordinates your 400 hours or leaves them to you. That answer matters more than a small tuition gap. If speed and price are your main filters, the breakdown of the cheapest and fastest sterile processing programs compares total time and cost across routes.
What Online Sterile Processing Classes Cost
Two things drive the price: how much support you get, and whether an exam voucher is included. Self-paced diplomas sit at the low end, often a few hundred dollars, because you supply the discipline and the schedule. Instructor-led bootcamps run higher, roughly $2,900 to $4,000, because you are paying for pacing, support, and usually the certification exam fee.
One question shows up constantly in search: are any of these free? Honestly, truly free online classes are rare. The closest real routes are employer-sponsored training, where a hospital trains and certifies you on the job, and high school or community college programs, which are low-cost rather than free. Workforce grants, such as WIOA funding, can also cover tuition for those who qualify. If cost is the deciding factor, those are worth checking before you pay out of pocket.
CRCST vs CSPDT: Which Certification to Prepare For
Certification is separate from finishing a class. A program can prepare you for an exam, but the certifying body sets the eligibility rules, and those rules are what actually gate the credential. Two options cover most of the field.
CRCST, through HSPA, is the most widely recognized. You pass the exam, then complete the 400 hands-on hours described above; passing first earns you a provisional status until the hours are done. This is the credential most employers name in job postings.
CSPDT, through the Certification Board for Sterile Processing and Distribution (CBSPD), is the alternate. CBSPD lists several eligibility routes, including completing a sterile processing training course with a passing grade, which some candidates find easier to satisfy than the 400-hour structure.
Credential | Certifying body | Key requirement |
|---|---|---|
CRCST | HSPA | Exam plus 400 hands-on hours |
CSPDT | CBSPD | Exam plus a qualifying course or experience route |
Which one to prepare for comes down to your state and your employer. A handful of states now require sterile processing certification by law, including Connecticut, Delaware, New Jersey, New York, Pennsylvania, and Tennessee, and more have added or are weighing requirements. Because that list keeps changing, confirm your state's current rule with HSPA before you choose a credential path, and check which certification your target employers actually list.
What Sterile Processing Technicians Earn
Pay for this role clusters in the low-to-mid $40,000s nationally, with room to move up through certification, shift differentials, and experience. The federal data tracks sterile processing under medical equipment preparers, and the May 2025 figures put the median at $47,700 a year, which works out to about $22.93 an hour or $3,975 a month.
Those are national midpoints, not a floor or a ceiling. Actual pay shifts with your state, your metro, your employer, the shift you work, and whether you hold a credential. Treat the number as one input for comparing programs, alongside cost and certification fit, rather than a promise of what you will earn.
For the wider outlook, the same federal category reported about 76,500 jobs in 2024, roughly 10% projected growth through 2034, and around 10,900 openings a year on average, with a high school diploma as the typical entry point.
How to Choose an Online Program
The best program is not the fastest or the cheapest by default; it is the one that lines up with the credential your state and employer expect and gives you a real plan for the hands-on hours. Speed matters least here, because sterile processing rewards accuracy, and rushing the part that keeps patients safe helps no one.
When you compare the options above, weigh five things:
- Certification fit: does it prepare you for the credential your employers actually list, CRCST or CSPDT?
- The hands-on plan: does the program coordinate your 400 hours, or leave them to you?
- Total cost: tuition plus books, exam vouchers, and fees, not just the sticker price.
- Schedule: self-paced, instructor-supported, or cohort-based, matched to how you actually work.
- Support: exam prep, advising, and clear answers when you email a question.
If arranging hours locally sounds easier than going fully remote, comparing sterile processing classes near me can surface programs with built-in clinical placements. When two options look similar on paper, the tie-breaker is usually the hands-on plan, because that is the step that most often stalls online students.
Frequently Asked Questions
Do employers accept an online sterile processing certification?
Employers hire on the credential, not on where you took the classes. What they look for is a recognized certification, usually CRCST or CSPDT, which means you passed the exam and met the hands-on requirement. An online program that prepares you for one of those exams is treated the same as an in-person one, as long as you complete the same certification steps.
How much does the CRCST certification exam cost?
HSPA charges a flat $140 for the CRCST written exam, the same for members and non-members. That fee is separate from your program tuition, so factor it into your total cost. Some bootcamp-style programs bundle the exam voucher into their price, which is worth checking when you compare options.
Can you self-study for the sterile processing exam instead of taking a class?
It is possible, and it works best if you already have sterile processing experience to draw on. Beginners usually struggle without a structured program, because the material covers technical vocabulary, infection control, instrument identification, and documentation that are hard to absorb in isolation. Either way, if you are going for CRCST, the 400 hands-on hours are still required.
Are online sterile processing programs accredited?
Accreditation and certification are two different things. Some online programs are offered through accredited institutions, while others are training providers whose value is in preparing you for the certification exam. The credential you earn, CRCST or CSPDT, carries the weight with employers, so confirm which exam a program prepares you for and check the certifying body's requirements directly.
How fast can you become a sterile processing technician?
The coursework itself can take just a few months, and some self-paced programs move faster. The full timeline depends on the hands-on hours: if you pursue CRCST, the 400 required hours can stretch the path well beyond the classroom portion, especially if you have to arrange the placement yourself. Quick coursework does not remove that requirement.
Choosing an Online Sterile Processing Path
The piece worth remembering is simple: online classes get you the knowledge, but the 400 hands-on hours are what actually turn a finished course into a working credential. A program that helps you arrange those hours is usually worth more than one that shaves a few weeks or a few hundred dollars off the price.
That is the lens to shop with. When you are ready, line up the online options on Dreambound and weigh them on placement help first, then cost and format.

